delete

Proper Maintenance for Screen Doors

Screen Doors are Beneficial and functional if kept in very good condition. In this article, we’ll discuss the maintenance of your screen doors as well as a guide to check if your screen door already needs replacement. 

Clean your Door! 

It’s very important to clean your doors. Screen doors are supposed to be cleaned at least two times a month if you live in a temperate area like Tallahassee and at least once a month if you live in an urban area.  

The first thing you need to do is remove it. Cleaning the door attached to the wall may damage its hinges. Its best to leave it lying on the ground.  

Next would be vacuuming it. After removing the screen doors, vacuuming it will remove most of the dirt on the surface.  

After you’re done vacuuming the dust and dirt built up on the screen, the next thing you will need to do is wash it. There are cleaning products specially formulated for screen doors. Be careful not to put too much pressure when scrubbing your screen.  

Wait for it to dry before placing it back up. If you’re unable to remove your door from the hinge, you can still vacuum it but you will need to be careful while watering it down.  

 

Be careful with your Mesh! 

The Softer Mesh part of the door, usually removable is called an insect screen mesh. This part is very susceptible to damage and wear and tear. Using cleaning products can put it back into its clean state but be careful as it may also corrode the mesh along the way.  

 

Take care of your Locks and Hinges! 

The locks and hinges of your door are somewhat essential and usually is the most annoying part of every screen door. These parts are usually made of alloy or metal and overtime when corroded with a moist, humid or temperate atmosphere, its rusts. This causes the hinges and locks to make little annoying squeaky sounds when you open and close the door.  

Lock maintenance requires lubricating the body of the lock with lubricating oil or silicone sprays. This also applies to hinges. Grime and dirt buildup usually sticks in the lock or hinge material that’s why it’s best to maintain it to avoid the screeching squeak noise the door is making.  

 

Do your research on Proper Cleaning Materials!  

It is very important to do a quick research when you’re looking for the right materials to use when cleaning your screen door. Vacuums and Sponges are available in a local hardware store. You can also search for the other materials there like lubricating oil or silicone spray for locks and hinges.  

 

If you think your screen door needs rescreening you can rescreen it yourself, but it takes a lot of elbow grease and skill to properly replace a screen on a screen door. Often, people just opt for a repair if the damage is only minimal. Check out screen repair Tallahassee that offer rescreening and repair service if you’re interested in a professional that can assist you with your screen door and other screens that need fixing at your home.  

delete

Reasons Why You Need to Maintain your Furnace

When winter season is coming up, you get a lot of calls or reminders from furnace repair Calgary service companies that you need to have a furnace tune-up and usually you just ignore this because you’re probably thinking that your furnace is working perfectly fine. Little did you know that there are reasons why you get reminded that and these reasons are why it is essential that you maintain your furnace.  

A lot of people experience their furnaces breaking or shutting down in-between winter season due to a lack of furnace maintenance and tune –ups. Here’s a list of reasons why you need to properly maintain and have your furnace annually inspected: 

 

  1. Maintenance equals to Safety 

Regular maintenance and furnace tune –ups keep you safe from the possibility of hazardous or even deadly outcomes. Furnaces works like a car, in order for the engine to run, it needs fuel. Fuel is burned to produce heat. This is a process of combustion that needs to be precise and accurate to maintain safety. Gas leaks are a possibility if your furnace is not well maintained. 

      2. Repair Less Frequently  

Repairing the furnace before winter is most common call Furnace Repair Service providers get, although a furnace repair would have been prevented if the Furnace was maintained properly. In a Furnace tune –up or maintenance, small problems are being resolved to prevent huge damages that can lead to more repairs or even replacement. 

       3. Lower Electricity Costs 

Your furnace will be running all winter so it would be best to ensure that it will not have a hard time producing heat. In Furnace tune –ups, they also clean the burners and heat exchanger, with this, the furnace would be running as if it’s as good as new.  

       4. Saves up your Time 

Maintaining the furnace before winter comes would be much easier because as mentioned earlier, people call for Furnace repairs more frequently during the winter. You would not need to wait in the cold as your Furnace Repair Service arrives to fix your broken furnace since it’s well maintained and is functioning properly.  

      5. Ensuring Proper Functionality 

The Furnace Repair Service Professional should check if your heating system is receiving proper airflow. If the airflow is restricted, this will be straining your furnace and it may cause a wear and tear more quickly, shortening the lifespan of your furnace.  

 

Also, if your furnace is under a warranty then most manufacturers say that the warranty becomes void if you do not properly and regularly maintain it. While it’s not winter season yet, call a Professional Furnace Repair Service Contactor to help you maintain and tune-up your Furnace.  

These Furnace Repair Services are usually readily available to anyone, anywhere but if you live in Calgary, CALGARY FURNACE AND AC REPAIR can help you out with your furnace maintenance or repair needs.  

You can check out their website for their contact information and for the services they provide.